On your Himax WE-I Plus

Impulses can be deployed as a C++ library. This packages all your signal processing blocks, configuration and learning blocks up into a single package. You can include this package in your own application to run the impulse locally. In this tutorial you'll export an impulse, and build an application for the Himax WE-I Plus development board to classify sensor data.
Knowledge required
This tutorial assumes that you're familiar with building applications for the Himax WE-I Plus. If you're unfamiliar with either of these you build binaries directly for your development board from the Deployment page in the studio.
Note: Are you looking for an example that has all sensors included? The Edge Impulse firmware for the Himax WE-I Plus has that. See edgeimpulse/firmware-himax-we-i-plus.
Prerequisites
Make sure you've followed one of the tutorials and have a trained impulse. Also install the following software:
​Edge Impulse CLI - to flash the firmware.
A build toolchain, either:
​Docker desktop.
Or, the GNU Toolchain for DesignWare ARC processors, and make sure you have arc-elf32-gcc in your PATH (Linux only).
Or, the DesignWare ARC MetaWare Toolkit - including a valid license, and make sure you have ccac in your PATH.
If you're building with the GNU or DesignWare toolchains, also install:
​CMake.
​GNU Make.
Cloning the base repository
We created an example repository which contains a small application for the Himax WE-I Plus, which takes the raw features as an argument, and prints out the final classification. Download the application here, or import this repository using Git:
1
$ git clone https://github.com/edgeimpulse/example-standalone-inferencing-himax
Copied!
Deploying your impulse
Head over to your Edge Impulse project, and go to Deployment. From here you can create the full library which contains the impulse and all external required libraries. Select C++ library and click Build to create the library.
Download the .zip file and extract the directories in the 'example-standalone-inferencing-himax' folder. Make sure to not replace CMakeLists.txt in this folder. Your final folder structure should look like this:
1
example-standalone-inferencing-himax
2
|_ arc_mli_package
3
|_ edge-impulse-sdk
4
|_ image_gen_linux_v3
5
|_ model-parameters
6
|_ tflite-model
7
|_ main.cc
Copied!
Running the impulse
With the project ready it's time to verify that the application works. Head back to the studio and click on Live classification. Then load a validation sample, and click on a row under 'Detailed result'.
Selecting the row with timestamp '320' under 'Detailed result'.
To verify that the local application classifies the same, we need the raw features for this timestamp. To do so click on the 'Copy to clipboard' button next to 'Raw features'. This will copy the raw values from this validation file, before any signal processing or inferencing happened.
Copying the raw features.
Open main.cc and paste the raw features inside the static const float features[] definition, for example:
1
static const float features[] = {
2
    -19.8800, -0.6900, 8.2300, -17.6600, -1.1300, 5.9700, ...
3
};
Copied!
Then build and flash the application to your development board:
Building the application (Docker)
1.Build the container:
1
$ docker build -t himax-build-gnu -f Dockerfile.gnu .
Copied!
2.Then set up your build environment:
1
$ mkdir -p build-gnu
2
$ docker run --rm -it -v $PWD:/app himax-build-gnu /bin/bash -c "cd build-gnu && cmake -DCMAKE_TOOLCHAIN_FILE=toolchain.gnu.cmake .."
Copied!
3.And build and link the application:
1
$ docker run --rm -it -v $PWD:/app:delegated himax-build-gnu /bin/bash -c "cd build-gnu && make -j && sh ../make-image.sh GNU"
Copied!
There are instructions in the README.md file on how to build with the Metaware toolkit under Docker.
Building the application (Metaware Toolkit)
1.Create a build directory and initialize CMake:
1
$ mkdir build-mw
2
$ cd build-mw
3
$ cmake -DCMAKE_TOOLCHAIN_FILE=toolchain.metaware.cmake ..
Copied!
2.Build and link the application:
1
$ make -j
2
$ sh ../make-image.sh MW
Copied!
Building the application (GNU)
1.Create a build directory and initialize CMake:
1
$ mkdir build-gnu
2
$ cd build-gnu
3
$ cmake -DCMAKE_TOOLCHAIN_FILE=toolchain.gnu.cmake ..
Copied!
2.Build and link the application:
1
$ make -j
2
$ sh ../make-image.sh GNU
Copied!
Flashing
You'll need the Edge Impulse CLI v1.10 or higher. Then flash the binary with:
1
$ himax-flash-tool --firmware-path image_gen_linux/out.img
Copied!
Seeing the output
To see the output of the impulse, connect to the development board over a serial port on baud rate 115,200 and reset the board. You can do this with your favourite serial monitor or with the Edge Impulse CLI:
1
$ edge-impulse-run-impulse --raw
Copied!
This will run the signal processing pipeline, and then classify the output:
1
Edge Impulse standalone inferencing (Himax)
2
Running neural network...
3
Predictions (time: 0 ms.):
4
idle:   0.015319
5
snake:  0.000444
6
updown: 0.006182
7
wave:   0.978056
8
Anomaly score (time: 0 ms.): 0.133557
9
run_classifier_returned: 0
10
[0.01532, 0.00044, 0.00618, 0.97806, 0.134]
Copied!
Which matches the values we just saw in the studio. You now have your impulse running on your Himax WE-I Plus development board!

On your Zephyr-based Nordic Semiconductor development board

On your Raspberry Pi Pico (RP2040) development board

Last modified 2mo ago

Export as PDF

Copy link

Contents

Prerequisites

Cloning the base repository

Deploying your impulse

Running the impulse

Seeing the output