Edge Impulse for Linux

Edge Impulse for Linux is the easiest way to build Machine Learning solutions on real embedded hardware. It contains tools which let you collect data from any microphone or camera, can be used with the Node.js, Python, Go and C++ SDKs to collect new data from any sensor, and can run impulses with full hardware acceleration - with easy integration points to write your own applications.

Development boards

This is a list of development boards that are fully supported by Edge Impulse for Linux. Follow the instructions to get started:

• Raspberry Pi 4.

• Advantech ICAM-540.

• NVIDIA Jetson Orin and Nano.

• Renesas RZ/V2L.

• Mac.

• Linux x86_64 devices.

• Texas Instruments SK-TDA4VM.

• Texas Instruments SK-AM62A-LP.

• Texas Instruments SK-AM668A.

Different development board? Probably no problem! You can use the Linux x86_64 getting started guide to set up the Edge Impulse for Linux CLI tool, and you can run your impulse on any x86_64, ARMv7 or AARCH64 Linux target. For support please head to the forums.

Officially supported AI Accelerators

This is a list of AI accelerators that are fully supported by Edge Impulse of Linux. Follow the instructions to get started:

• BrainChip AKD1000.

• MemryX MX3

Inferencing libraries

To build your own applications, or collect data from new sensors, you can use the high-level language SDKs. These use full hardware acceleration, and let you integrate your Edge Impulse models in a few lines of code:

• Node.js.

• Python.

• Go.

• C++.

.eim models?

Edge Impulse for Linux models are delivered in .eim format. This is an executable that contains your signal processing and ML code, compiled with optimizations for your processor or GPU (e.g. NEON instructions on ARM cores) plus a very simple IPC layer (over a Unix socket). See our Linux EIM executable guide to learn more.