On your TI LaunchPad using GCC and the SimpleLink SDK
Last updated
Was this helpful?
Last updated
Was this helpful?
Impulses can be deployed as a C++ library. This packages all your signal processing blocks, configuration and learning blocks up into a single package. You can include this package in your own application to run the impulse locally. In this tutorial you'll export an impulse, and build an impulse using the Texas Instruments SimpleLink SDK for the CC1352P LaunchPad and Sensors BoosterPack.
Make sure you followed the tutorial, and have a trained impulse.
Clone the repository to your working directory.
Install
Install the desktop version for your operating system
Add the installation directory to your PATH
See for more details
Head over to your Edge Impulse project, and go to Deployment. From here you can create the full library which contains the impulse and all external required libraries. Select C/C++ Library and click Build to create the library. Then download and extract the .zip file.
To add the impulse to your firmware project, paste the edge-impulse-sdk/, model-parameters and tflite-model directories from the downloaded '.zip' file into the edge_impulse/ directory of the repository. Make sure to overwrite any existing files in the edge_impulse/ directory.
This standalone example project contains minimal code required to run the imported impulse within the SimpleLink SDK. This code is located in ei_main.cpp. In this minimal code example, inference is run from a static buffer of input feature data. To verify that our embedded model achieves the exact same results as the model trained in Studio, we want to copy the same input features from Studio into the static buffer in ei_main.cpp.
To do this, first head back to the studio and click on the Live classification tab. Then load a validation sample, and click on a row under 'Detailed result'.
To verify that the local application classifies the same result, we need the raw features for this timestamp. To do so click on the 'Copy to clipboard' button next to 'Raw features'. This will copy the raw input values from this validation file, before any signal processing or inferencing happened.
In ei_main.cpp paste the raw features inside the static const float features[] definition, for example:
The project will repeatedly run inference on this buffer of raw features once built. This will show that the inference result is identical to the Live classification tab in Studio. From this starting point, the example project is fully compatible with existing SimpleLink SDK plugins, drivers or custom firmware. Use new sensor data collected in real time on the device to fill a buffer. From there, follow the same code used in ei_main.cpp to run classification on live data.
There are two ways to build the project. The first uses the included Docker environment, pre-configured with the correct SimpleLink SDK version and ARM GCC toolchain. The other option is to build the project locally. This will require installing dependencies and making minor modifications to the makefile
Run the Docker Desktop executable, or start the docker daemon from a terminal as shown below:
Build the application by running the container as follows:
Windows
Linux, macOS
Connect the board to your computer using USB.
If you are building locally, You will first need to install the following dependencies. This guide assumes these are installed into the same working directory as the cloned standalone example repo.
Next you will need to open the gcc/makefile file in the standalone example repository, and define custom paths to your installed dependencies.
Remove the SIMPLELINK_CC13X2_26X2_SDK_INSTALL_DIR on line 2 of the makefile, and add the following definitions at the top of the makefile
If you installed the dependencies to another directory, modify the paths as needed.
Now you should be ready to build, from the gcc/ folder of the standalone firmware repo, run:
If the UniFlash CLI is added to your PATH, run:
If the UniFlash CLI is added to not added to your PATH, the install scripts will fail. To fix this, add the installation directory of UniFlash (example /Applications/ti/uniflash_6.4.0 on macOS) to your PATH on:
If during flashing you encounter issues after UniFlash is added to PATH, ensure:
The device is properly connected and/or the cable is not damaged.
You have the proper permissions to access the USB device and run scripts. On macOS you can manually approve blocked scripts by clicking the System Preferences->Security Settings->Unlock Icon (Bottom Left) and then approving the blocked script.
If on Linux you may want to try copying tools/71-ti-permissions.rules to /etc/udev/rules.d/. Then re-attach the USB cable and try again.
If you are building with Docker, you will need to have installed.
From the directory, build the Docker image:
version simplelink_cc13x2_26x2_sdk_5.20.00.52
version 9-2019-q4-major
and then
Alternatively, the gcc/build/edge-impulse-standalone.out binary file may be flashed to the LaunchPad using the UniFlash GUI or web-app. See the for more info.
