Flex delegates

On Linux platforms without a GPU or neural accelerator your model is run using TensorFlow Lite. Not every model can be represented using native TensorFlow Lite operators. For these models, 'Flex' ops are injected into the model. To run these models you'll need to have the flex delegate library installed on your Linux system. This is a shared library that you need to install once.

If your model contains flex ops you'll see this in a few places:

• During deployment in the Studio (e.g. "WARN: This model contains ops that require flex delegates (FlexErf). You will need to install the flex delegates shared library to run this model.").

• When running a model using the Linux CLI (e.g. "error while loading shared libraries: libtensorflowlite_flex_2.6.5.so. You will need to install the flex delegates shared library to run this model.").

Installing the flex delegate library

To install the flex delegate library:

1. Download the shared library for your target architecture and operating system:

   • macOS, x86 (also runs on M1/M2 using Rosetta)

   • Linux, armv7 (most 32-bits Arm-based Linux systems, e.g. Raspberry Pi 4 running 32-bits Raspbian)

   • Linux, aarch64 (most 64-bits Arm-based Linux systems, e.g. Jetson Nano)

   • Linux, x86_64 (Intel/AMD based Linux systems)

2. Place the libtensorflowlite_flex_2.6.5.so (or .dylib on macOS) file in /usr/lib or /usr/local/lib.

Linking the flex delegate library using the C++ SDK

If your model has flex ops, and you're building using the Linux C++ SDK, then pass the LINK_TFLITE_FLEX_LIBRARY=1 flag when building the application.

When using the Node.js, Go or Python SDK then the .eim file already has the flex delegates library linked in.