Officially supported MCU targets
Overview
Microphone
Camera*
4MB
4MB
Cortex-M55 400MHz Ethos U55-256MACC
Alif E7 quad-core fusion processor
Accelerometer
Microphone
Environmental
Camera*
256KB
1MB
Cortex-M4F 64MHz
nRF52840
Accelerometer
Microphone
Camera
1MB
2MB (internal) 16MB (external QSPI flash)
Cortex-M4 240Mhz Cortex-M7 480MHz
STM32H747AII6
Microphone
64kB
512kB (internal) 2MB (external)
Cortex-M4 64Mhz NDP120
nRF52832 Syntiant Core 2™
Camera
Microphone*
512KB
2MB
Cortex-M4 240Mhz Cortex-M7 480MHz
STM32H747XI
Camera
Accelerometer*
Microphone*
GPIO*
4MB
4MB
ESP32 240MHz
Xtensa® single-/dual-core 32-bit LX6 microprocessor
Accelerometer
Microphone
1MB
2MB
Cortex-M4F 150MHz + Cortex-M0+ 100MHz
PSoC62
Camera
1MB (SRAM) 32MB (SDRAM)
2MB (internal) 32MB (external)
Cortex-M7 480MHz
STM32H743II
Accelerometer
Microphone
Camera*
256KB
1.5MB
Cortex-M33 78MHz
EFR32MG24B310F1536IM48
Accelerometer*
Microphone*
Environmental*
GPIO*
256KB
2MB (QSPI flash)
Dual-Core Cortex-M0+ 133MHz
RP2040
* Maybe not available on the board and require to attach additional sensors, see the dedicated page for more information.
** RAM used for the latency calculation, may differ from the datasheet.
*** ROM used for the latency calculation, may differ from the datasheet.
Different development board or different sensors? No problem, you can always collect data using the Data forwarder or the Edge Impulse for Linux SDK, and deploy your model back to the device with the Running your impulse locally tutorials. Also, if you feel like porting your board, use this Porting guide.
Last updated